Caractéristiques
  • Audio source with 80W power amplifier
  • MP3 player controlled from the front panel
  • MP3 inputs: USB flash, SD card, AUX jack 3.5mm
  • Bluetooth connection with external devices.
  • 2 universal inputs on removable screw-terminals and 1 AUX input
  • Configurable priority settings, VOX facility on input 1
  • Auxiliary output MUSIC ON HOLD to send the audio signal to external amplifiers or telephone switchboards
  • PRE OUT connector for additional power amplifiers
  • HI-PASS control (inputs 1 and 2)
  • Auxiliary input on RCA connector and MP3 player equipped with independent tone controls (bass and treble) and gain

ES 3080 is an 80 W mixer-amplifier with a MP3 player directly accessible on the front panel. It can read USB sticks, SD cards, has an auxiliary input port with 3.5mm jack and Bluetooth technology for the connection with external sources. Moreover, it offers 2 mic-line audio inputs on removable connectors (the first input also has an XLR socket). Input 2 also has an RJ 45 port for quick connection of an RCF BM 3001 paging microphone (through CAT5 cable). The amplifier output is available either for low impedance speakers (min. 4 O) or 100 – 70 V constant voltage line (for speakers having 100 – 70 V transformers). Input 1 has a signal detection circuit (‘VOX’) for automatic priority. Inputs 1 and 2 can access the priority through an external command (connected to either the removable connector or the RJ 45 port). The MUSIC ON HOLD output directly sends the internal MP3 player signal to additional amplifiers, mixers, phone systems (‘music on hold’ function), etc. The PRE OUT output sends the signal (the same routed to the internal amplifier) to additional amplifiers. The 2 mic-line inputs have a high-pass filter (with a common on/off dip-switch) that are useful to improve speech intelligibility. The internal MP3 player and the AUX INPUT have tone controls (common for both). Front panel LEDs indicate the device state (ON, PROT), priority circuit enabled (PRIOR) and the signal level / peak (SIG/PK).

Part number:

12135107
ES 3080
EAN 8024530012717

Caractéristiques
Specifications amplification
Réponse en fréquence (-3 dB)
50 Hz ÷ 16 Hz
Distorsion (THD+N) @ tension nominale de 1 kHz
<0.3 %
Section entrées
Nombre total d’entrées
5
Équilibré
5
Asymétrique
1
Mono
4
Stéréo
2
Entrées de ligne
2
Connecteurs de ligne
JACK, RCA
Entrées micro + ligne
2
Connecteurs micro + ligne
Euroblock, XLR
Alimentation fantôme micro + ligne
30 V DC
VOX:
Yes
Entrées de pagination
1
Connecteurs de pagination
RJ45
Commande de pagination
Contact
Section sortie
Numéro de sortie du signal
2
Connecteurs de sortie du signal
RCA
Connecteurs de sortie de tension
Euroblock
Processing
Réglages de tonalité
Yes
Filtre passe-haut
150 Hz
Configuration et contrôle
Configuration
DIP switch, Front panel
Priorité
Yes
Musique en attente
Yes
Tonalité
Yes
Protections
Système de refroidissement
Convection
Court-circuit
Yes
Thermique
Yes
CC
Yes
Fusibles
Yes
Sources audio
Clés USB
Yes
Carte mémoire SD
Yes
Bluetooth
Yes
Alimentation requise
Tension de service (V ~ Hz)
220-240/115 V~ 50/60Hz
Réglage de la tension
Internal
Consommation électrique (MAX) (W)
160 W
Specifications physiques
Couleur
Black
Montage en rack
19", 2U , Optional rack mounting accessory required
Taille
Hauteur
88 mm / 3.46 inches
Largeur
442 mm / 17.4 inches
Profondeur
230 mm / 9.06 inches
Poids
3.9 kg / 8.6 lbs
Infos colisage
Hauteur du colis
200 mm / 7.87 inches
Largeur du colis
330 mm / 12.99 inches
Profondeur du colis
500 mm / 19.69 inches
Poids du colis
5.4 kg / 11.9 lbs
Téléchargements
MANUELS
PDF
3,4 Mo
13-12-2021
FICHES TECHNIQUES
PDF
659 Ko
22-01-2024
PDF
659 Ko
22-01-2024
DESSINS
PDF
760 Ko
13-12-2021